How do you use Cutrine plus liquid?

How do you use Cutrine plus liquid?

Apply Cutrine Plus Liquid Algaecide with a sprayer at a rate of 0.6 to 1.2 gallons per acre foot of water when algae begins to grow and water is over 60°F. Dilute 1 part Cutrine Plus to 9 parts water and spray as evenly as is practicable over the surface of the water. Warning!

Does Cutrine plus need a surfactant?

Cutrine Plus Algaecide does not require you to add a surfactant. 34 of 35 people found this answer helpful.

How do you use Cutrine plus granular to pond?

For best results, apply early on the morning of a calm, sunny day with water temperature of 60 degrees Fahrenheit or warmer. Contact time should be at least 3 hours. Bright sunlight will improve effectiveness. Use Cutrine-Plus Granular to conveniently spot treat sections of a pond or lake front.

How much is Cutrine plus per acre?

CUTRINE®-PLUS- is applied at a rate of 0.6 gallon per acre-foot (43,560 cubic feet) of water to be treated for planktonic and filamentous algae, 1.2 gallons per acre-foot for Chara and Nitella and 1.2 to 3.0 gallons per acre-foot for Hydrilla.

How do you dilute Cutrine Plus?

Step 2: Dilute the required amount of Cutrine with the right amount of water to ensure an even application is distributed. For small backpack sprayer applications, use a 9:1 dilution ratio (1 gallon of Cutrine Plus to 9 gallons of water) or a 50:1 dilution ratio when using water pump equipment or large tank sprayers.

How much Cutrine Plus do I use?

To apply Cutrine-Plus Liquid, determine the volume of water to be treated in acre-ft. For Filamentous and Planktonic Algae, use 1 gallon of Cutrine-Plus Liquid per 1.5 acre-ft of treated water. For Chara, use 2 gallons of Cutrine-Plus Liquid per 1.5 acre-ft. of treated water.

How do you dilute Cutrine plus?

How much Cutrine plus do I use?

What is the shelf life of Cutrine plus?

Additional Information

Availability In Stock Online
Shelf Life Cutrine Plus Granular Algaecide will last 1 to 3 years when stored in a cool, dry place.
Yield 30 lbs per half acre, 60 lbs per acre, or 1 lb per 720 square feet
Use Sites Outdoors
Time to Kill Starts working right away within 24-48 hours and lasts up to 5 weeks

Do you mix Cutrine Plus with water?

Mix Cutrine Plus with enough water to ensure and even application. When using a backpack sprayer or handheld pump sprayer mix 9 parts Cutrine Plus with 1 part water. 3 gallons of Cutrine Plus that contains 1.0 part per million (PPM) of copper will treat a 1 acre body of water that is 1 foot deep.

How long does it take for Cutrine Plus to work?

1 to 2 days
Cutrine-Plus Liquid is hard water stable. Far less corrosive than other common algaecides. Begins to work immediately on contact to break down algae’s cellular structure. Controls Planktonic Algae in 1 to 2 days, Filamentous Algae in 3 to 4 days.

How much is the Cutrine plus granular application?

Standard Application Rates: For easy spot treatments, apply Cutrine Plus Granular directly over infested area at the rate of 1 pound per 720 square feet (72′ X 10′). Large areas should be treated at the rate of 60 pounds per surface acre (208′ X 208′).

Can you use cutrine plus in fish water?

Cutrine Plus Algaecide is one of our most popular algaecides, effective against the most popular varieties of pond algae. Please be aware this and other algaecides with copper should not be used in water containing koi, trout, or goldfish, or in water that sheep or goats may drink.

What’s the dilution range for cutrine plus algaecide?

The label for Cutrine Plus Algaecide reads: Typical dilution range is 9:1 when using backpack-type sprayer or up to 50:1 when using water pump equipment or large tank sprayers. Was this answer helpful to you? Yes No 7 of 8 people found this answer helpful.

Can you use cutrine Plus on algae mats?

Yes, Cutrine Plus can be used on algae mats. You do not want to treat the entire pond all at once so that you do not harm the fish. You will use 1.5-2 gallons per surface acre of pond.

Can you use cutrine plus to kill weeds?

Cutrine Plus Algaecide only kills different forms of algae in a pond or lake and will not kill aquatic weeds. If you are looking to kill water lilies and other weeds you would use a product like SePro Sonar RTU Aquatic Herbicide.