How many cubic yards are in a ton of asphalt?

How many cubic yards are in a ton of asphalt?

2.025 tons
Calculating Yards to Tons of Asphalt If you are looking to calculate the asphalt weight per yard, Willie’s Paving notes that 1 cubic yard of hot asphalt mix weighs 2.025 tons. If you are calculating yards to tons of asphalt, multiply your cubic yard value by 2.025 tons to determine the project’s amount.

How do you convert yards to tons of asphalt?

First, you need to obtain the square measurement using a tape measure. Second, you determine the dimension of the yard in cubic meters and multiply by the depth. Third, you get the volume of the yard and multiply by the density and then change the cubic meter to ton asphalt.

How do you calculate tons of asphalt?

How to Calculate Asphalt Tonnage

  1. Use a tape measure to determine distances.
  2. Convert the length, width and height measurements to feet by dividing by 12, since each foot contains 12 inches.
  3. Multiply the length times the width times the depth to obtain the volume in cubic feet of the space to be paved.

How much does asphalt weight per cubic yard?

Hot Asphalt and Concrete Mix weigh closer to 4000 lbs per cubic yard. Screened Topsoil weighs like the sand, gravels, and decorative rocks, But Blended Soils such as Topsoil Blend or Mountain Blend weigh approximately 1500 lbs per cubic yard. Dyed Mulches can weigh anywhere from 500 – 800 lbs per cubic yard.

How many cubic yards are in a ton?

You now have your answer in tons per cubic yard (1.15 US tons or 1.04 metric tonnes)

How do you convert area to tons?

Manual Calculator

  1. Multiply the length of the area by the width of the area = Square Feet.
  2. Multiply Square Feet by the Depth* = Cubic Feet.
  3. Divide Cubic Feet by 27 = Cubic Yards.
  4. Multiply Cubic Yards by 1.5 = Tons Needed.

How many tons is 4 cubic yards?

Cubic yards to tons for common materials

Material (1 yd3) Density Estimate US tons
Concrete 140 – 150 lb/ft3 1.89 to 2.03
Dirt 65 – 80 lb/ft3 0.88 to 1.08
Gravel (loose, dry) 75 – 95 lb/ft3 1.01 to 1.28
Gravel (dry 1/4 to 2 in) 105 lb/ft3 1.42

How do you calculate a ton?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

How many tons of asphalt are in a truck load?

Bulk asphalt cost per truckload Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick.

How many cubic yards are in 10 tons?

Ton Register to Cubic Yard Conversion Table

Ton Register [ton Reg] Cubic Yard [yd^3]
5 ton reg 18.5185185185 yd^3
10 ton reg 37.037037037 yd^3
20 ton reg 74.0740740741 yd^3
50 ton reg 185.1851851852 yd^3

How do you convert cubic TO tons?

1 ton (40 cubic feet) = 1.133 cubic metres. 1 cubic metre = 0.883 cubic tons (35.32 cubic feet)

What is the formula to convert cubic yards into tons?

For cubic yards, divide the total cubic feet by 27. Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons.

How do you change cubic yards to tons?

A general rule of thumb when converting cubic yards of gravel to tons is to multiply the cubic area by 1.4. For your reference, gravel typically weighs 2,800 pounds per cubic yard. In addition, there are 2,000 pounds to a ton. For instance, if your area to be landscaped is 100 cubic yards, multiply that by 1.4.

How many tons are in a yard of asphalt?

If you are looking to calculate the asphalt weight per yard, Willie’s Paving notes that 1 cubic yard of hot asphalt mix weighs 2.025 tons. If you are calculating yards to tons of asphalt, multiply your cubic yard value by 2.025 tons to determine the project’s amount.

How do you convert tons into cubic yards?

You can convert from metric tons to cubic yards by multiplying the material’s mass by its density and then doing the metric conversion. Multiply the amount in metric tons by 1,000 to convert to kilograms.