Is computer in French feminine or masculine?

Is computer in French feminine or masculine?

For instance, some nouns are always masculine no matter what, like un sac (a bag), un manteau (an overcoat), and un ordinateur (a computer). Others are always feminine, like une voiture (a car), une maison (a house), and une école (a school).

What is the difference between a male and female computer?

A male connector is commonly referred to as a plug and has a solid pin for a center conductor. A female connector is commonly referred to as a jack and has a center conductor with a hole in it to accept the male pin.

Is computer a female?

The men’s group decided that ‘computer’ should definitely be of the feminine gender (‘la computadora’), because: The native language they use to communicate with other computers is incomprehensible to everyone else.

Why are connectors called male and female?

The assignment is a direct analogy with genitalia and sexual intercourse, the part bearing one or more protrusions or which fits inside the other being designated male, in contrast to the part containing the corresponding indentations, or fitting outside the other, being designated female.

What is a female coupler?

The female coupler is a push-fit plastic fitting made for the connection of plastic and copper pipe. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

What is the male connector?

A male connector is a connector attached to a wire, cable, or piece of hardware, having one or more exposed, unshielded electrical terminal s, and constructed in such a way that it can be inserted snugly into a receptacle ( female connector ) to ensure a reliable physical and electrical connection .

What is male to female jumper wires?

Types of Jumper Wires Jumper wires typically come in three versions: male-to-male, male-to-female and female-to-female. The difference between each is in the end point of the wire. Male ends have a pin protruding and can plug into things, while female ends do not and are used to plug things into.

What is the purpose of a jumper wire?

A jump wire (also known as jumper, jumper wire, jumper cable, DuPont wire or cable) is an electrical wire, or group of them in a cable, with a connector or pin at each end (or sometimes without them – simply “tinned”), which is normally used to interconnect the components of a breadboard or other prototype or test …

What does jumping a wire mean?

The term “jumper wire” simply refers to a conducting wire that establishes an electrical connection between two points in a circuit. You can use jumper wires to modify a circuit or to diagnose problems in a circuit.

What is a coaxial jumper used for?

Coax jumper cables are commonly used to transmit signal and radio frequency (RF) in the multi megahertz range. Coaxial cable jumpers can be built with various types of connectors and cable types, with varying lengths depending on the intended use or application.

Does coax length affect SWR?

Coaxial Cable Length Does Not Change Antenna SWR.

How far can coax cable run?

Coaxial cable can be cabled over longer distances than twisted-pair cable. For example, Ethernet can run approximately 100 meters (328 feet) using twisted-pair cabling. Using coaxial cable increases this distance to 500m (1640.4 feet).

Are RG6 and RG11 connectors the same?

Both the RG6 and RG11 cables are 75-ohm cables that make use of F-type connectors. RG11 has a greater and longer range longer than the R6. To be more specific, the RG6 tops out at 50 feet before the total signal loss. The RG11 does better with more than 50 feet to about 10 feet.

Should I use RG6 or RG11?

RG6 cables have greater attenuation compared to the RG11. Conversely, you can use greater longer RG11 cables before experiencing any noticeable signal loss. Another upside to the RG11 cable is that it can transmit signals at a higher frequency range, which the RG6 cable could no longer carry.

What is RG11?

RG11: RG11 is a triple or quad shielded coaxial cable about 10.5 mm in diameter and is used for long runs, in both aerial and underground conduit. RG11 coax operates at an impedance of 75 ohms and is suitable for video distribution.

What is better than RG11?

RG6 has higher attenuation level; RG11 has lower attenuation level. RG6 can transmit signals in a higher frequency range than RG6. Because RG11 has lower attenuation level, it can transmit in a father distance: RG6 can transmit signal in a distance of 600m, RG11 can transmit in a distance of 1,100m.

What is the maximum distance for RG6?

1,000 ft

Is RG11 better for Internet?

The reasons are simple. On the one hand,RG11 cables offer better performance than RG11 cables. On the other hand, RG11 cables use more materials for their thicker conductor, better insulation, and higher-quality shielding than RG6 cables.

How far can you run RG11 for Internet?

Distances for different coax cable types and the reasons why—In the field, RG11 coax runs more than 150–200 feet; RG6 coax is for less than 150 feet. However, people use RG6 coax because it is less expensive. The cable used depends on the attenuation desired and length of the link.

What is RG11 coax?

Offering less attenuation and signal loss than other coax cables, Belden’s RG11 Cable is designed to work with high-frequency ranges and maintain signal integrity across distances. With an impedance of 75 Ohms, it’s often used for projects that call for long, straight runs, as well as burial applications.

What is the highest quality coaxial cable?

Coaxial cable designed for domestic television should be 75 Ohm, with RG-6 coaxial being ideal for TV. The best coaxial cable for HDTV is RG-11. This type of cable offers a higher gauge than others, which provides more space for signals to transfer.

Does length of coaxial cable affect signal?

When it comes to signal loss over longer cable lengths, the basic rule of thumb is that a 50-foot cable can experience noticeable signal loss, and a 100-foot cable can drop as much as one-third of the original signal.

Can TV antennas go bad?

Well, not exactly… but yes there are things on an antenna that can actually stop working. When that happens, you generally need a new antenna. You might remember that TV antennas used to come with flat cable, and now they come with round coaxial cable. …

Can a coaxial cable be too long?

It is recommended that you use as little coaxial cable as you can. Using too much coaxial cable can result in as much as a 1/3 of the signal being lost. Please remember that the additional coaxial cable needs to be AFTER the amplifier, between the amplifier and the TV for best performance!

How do I increase coaxial signal strength?

Use a shorter coaxial cable to connect the wall jack to the device. The longer a coaxial cable, the more the signal degrades by the time it reaches the device. If possible, replace any coaxial cables longer than 20 ft. with a shorter cable.

What is 50 ohm coaxial cable?

So 50 ohm cables are intended to be used to carry power and voltage, like the output of a transmitter. If you have a small signal, like video, or receive antenna signals, the graph above shows that the lowest loss or attenuation is 75 ohms. Most often, these signals end up in antennas.

Do coax barrel connectors signal loss?

Every connector is normally a 3 db loss. If the cable connections or the barrell connector are crappy there can be even greater loss. If it is outdoowrs there is a potential for rust adding to the loss. Cable is cheap.