How do you unlock a Whirlpool washing machine door?
How do you unlock a Whirlpool washing machine door?
Hold down the “Control Lock” button on your Whirlpool washer for three seconds at the end of the washing cycle. Listen, and when you hear the unlatching sound, the door should open.
How do you bypass a locked washing machine door?
Simply pull the wire or line sideways, gently but firmly, towards the handle to release the door catch and open the door. If this hasn’t worked or your washing machine handle faces the opposite way you can still release the door catch.
Why is my washing machine stuck on door lock?
The most common cause is water left in machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.
How do you force a washing machine to unlock?
Turn the washing machine off and unplug it. If pausing the cycle doesn’t unlock the door, turn the machine off. Then, unplug the machine and wait 5-10 minutes. Try pulling the handle again to see if the door opens. This is the most common solution for top loaders.
How do I reset my Whirlpool front load washer?
The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.
How do I reset the lid lock on my Whirlpool washer?
If your lid lock light is flashing, you can unplug your washer for 10 minutes and plug it back in to reset the washer and the flashing light. You can also press and hold the ‘End of Cycle’ button for 20 seconds to reset the washer and flashing lid lock light.
Why is my whirlpool washer locked?
The lid can become locked if something is clogging the pump or filter drain. This means the washer is unable to drain properly, thus it won’t unlock the door. It may also mean you need to replace a faulty drain pump.
Why is my Whirlpool washer lid locked?
If the switch is damaged or has failed electronically, it’s possible the Whirlpool washer lid won’t unlock or signal a cycle to start. When the switch comes in contact with the strike, it locks the lid and signals the control panel to begin a wash cycle.