How do you reset a Braun ThermoScan?
How do you reset a Braun ThermoScan?
Reset your Smart Ear Thermometer:
- Slide the battery cover down then pull it away to expose the battery compartment.
- Remove the batteries.
- Wait 10 seconds.
- Put the batteries back in, the same as they were before.
- Push the button to turn on the thermometer.
Why is my Braun ThermoScan not working?
Make sure the probe tip and lens are clean and a new, clean lens filter is attached. Make sure the thermometer is properly inserted. Then, take a new tem- perature. If error persists, If error still persists, Wait 1 minute until the thermometer turns off automatically, then turn on again.
How do you change ThermoScan to Fahrenheit?
Press start button for 8 seconds until it switches between the two settings. Your Braun ThermoScan is delivered to you with the Celsius (°C) temperature scale activated. If you wish to switch to Fahrenheit (°F), p… see more. Press start button for 8 seconds until it switches between the two settings.
How do I unlock my Braun thermometer?
Upon expiration of the time limit, the unlocked icon and countdown timer will be replaced with the locked icon and the thermometer will beep once every 5 minutes to indicate locked state. Unlock the thermometer by returning it to the charging station.
How do you fix a Braun ear thermometer?
System Error – Wait 1 minute until the thermometer turns off automatically, then turn on again. If error persists reset the thermometer by removing the batteries and putting them back in. If error still persists contact your Welch Allyn representative. Insert new batteries.
What does it mean when Braun thermometer flashes?
If the thermometer is unstable or patient is moving during the measuring process, the device will beep, the green ExacTemp light will flash and POS (Position Error) will flash on the display. Be sure the device is stable and restrict patient movement for the next measurement. Change the probe cover to reset.