How many feet from a helicopters lifting area must loose gear and other objects be removed?

by ·

How many feet from a helicopters lifting area must loose gear and other objects be removed?

100 feet
All loose gear within 100 feet of the place of lifting the load, depositing the load, and all other areas susceptible to rotor downwash shall be secured or removed.

What is the OSHA 50?

WASHINGTON, DC – The U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) will commemorate the 50th anniversary of the Occupational Safety and Health Act of 1970 (OSH Act) with a yearlong celebration of past achievements, current efforts, and future initiatives to protect the American …

What does the D designation for fork trucks stand for?

The D designated units are units similar to the G units except that they are diesel engine powered instead of gasoline engine powered. 1910.178(b)(2)

How far must a ladder extend above the landing?

3 feet
Describes the OSHA rules for use of a portable ladder to access an upper landing surface – the side rails must extend at least 3 feet above the landing surface.

What are 3 examples of OSHA standards?

Examples of OSHA standards include require- ments to provide fall protection, prevent trenching cave-ins, prevent exposure to some infectious diseases, ensure the safety of workers who enter confined spaces, prevent exposure to such harmful substances as asbestos and lead, put guards on machines, provide respirators or …

What are some OSHA violations?

The Top 5 OSHA Violations in Manufacturing

  • Machine Guarding (1910.212, 219)
  • The Control of Hazardous Energy (1910.147) AKA Lockout/Tagout.
  • Hazard Communication (1910.1200)
  • Respiratory Protection (1910.134)
  • Electrical Wiring Methods (1910.303, 1910.305)

Under what conditions should you remove someone else’s lock from a lockout device?

When the authorized employee who applied the lockout or tagout device is not available to remove it, that device may be removed under the direction of the employer, provided that specific procedures and training for such removal have been developed, documented, and incorporated into the employer’s energy control …

Who can remove a Loto device?

The Lockout Tagout devices are finally removed from an energy isolating device, only by the worker who applied it. The removal of employees lock without his knowledge can be dangerous, as a general rule, the Lockout Tagout device should be removed by the employee himself/herself. 5.

What is the OSHA 502?

Prerequisites: OSHA #500 Trainers Course in OSHA Standards for the Construction Industry. Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status.

Is OSHA 510 the same as OSHA 30?

OSHA #510 Occupational Safety and Health Standards for the Construction Industry and OSHA #511 Occupational Safety and Health Standards for General Industry courses are not equivalent to OSHA 30-Hour Outreach Training for Construction and OSHA 30-Hour Outreach Training for General Industry classes, and it is important …

What are the general requirements of OSHA 1926.600?

General Requirements. 1926.600 (a) (1) All equipment left unattended at night, adjacent to a highway in normal use, or adjacent to construction areas where work is in progress, shall have appropriate lights or reflectors, or barricades equipped with appropriate lights or reflectors, to identify the location of the equipment. 1926.600 (a) (2)

What are the rules for leaving equipment unattended?

1926.600 – Equipment. Equipment. General Requirements . All equipment left unattended at night, adjacent to a highway in normal use, or adjacent to construction areas where work is in progress, shall have appropriate lights or reflectors, or barricades equipped with appropriate lights or reflectors, to identify the location of the equipment.

What is the OSHA standard for equipment clearance?

In transit with no load and boom lowered, the equipment clearance shall be a minimum of 4 feet for voltages less than 50 kV, and 10 feet for voltages over 50 kV, up to and including 345 kV, and 16 feet for voltages up to and including 750 kV; 1926.600 (a) (6) (iv)

What are OSHA standards for personal protective equipment?

Personal protective equipment is addressed in specific OSHA standards for general industry, maritime, and construction. OSHA requires that many categories of personal protective equipment meet or be equivalent to standards developed by the American National Standards Institute (ANSI).