How many feet would you need to stop if you were traveling at 55 mph?

How many feet would you need to stop if you were traveling at 55 mph?

300 feet

What is an adequate space cushion when traveling 55 mph?

Oncoming vehicles: At a speed of 55 mph, you need about 10 seconds to pass. That means you need a 10-second gap in oncoming traffic and sight distance to pass.

How much room should you have when passing a vehicle at 50 55 mph?

At highway speeds of 50 to 55 mph, you need a 10 to 12 second gap in oncoming traffic to pass safely. You must judge whether or not you have enough room to pass whenever you approach: An oncoming car.

How many feet does it take to stop at 60 mph?

140 feet

What is the first thing a driver should do after deciding to make a turn?

What is the first thing a driver should do after deciding to make a turn? Signal at least 200 feet from turn. The purpose of traffic signs are: To regulate, to warn, and to guide drivers.

What is the most important and safest thing a driver can do before driving away?

What is the most important and safest thing a driver can do before driving away? Put on a safety belt and turn off electronics. Illegal in Maryland if the vehicle is unattended and is not necessary. Check all mirrors, complete head checks, and use back up cameras if available.

What is the first thing a driver should do if the foot brake appears to fail?

What to do When Brakes Fail

  • Take your foot off the gas.
  • Turn on hazard lights (if you have time).
  • Downshift SLOWLY.
  • Pump the brake pedal hard and fast.
  • Cautiously apply emergency brake.
  • (Optional) Use guard rails.
  • Steer yourself to safety.

How many seconds should you signal before you turn?

HAND AND VEHICLE SIGNALS You should signal at least 100 feet before you turn so the other drivers can be ready. Check your vehicle’s turn signals often to ensure they are working properly. The pictures below show the correct hand signals to use when turning or stopping.

What should you do if you want to turn left when the oncoming traffic is heavy?

When making a left turn where there is approaching traffic, you must wait for the approaching traffic to go through before you turn. You may enter the intersection to prepare for your left turn if the light is green and no other vehicle ahead of you plans to make a left turn.

What are you chances of being in a collision if your BAC is 05 10 and 15 %?


Term You may not park within how many feet of a fire hydrant? Definition 10 feet
Term In city driving, it is good practice to: Definition Look 12 seconds ahead
Term How much are you chances of getting into an accident if your BAC is .05%, .10% and .15%? Definition 2x 6x 25x

When should your car be positioned next to the center line?

an approach for a left turn should be made in the part of the left half of the roadway nearest the center line on a two-lane road with traffic in both directions. C.) give a turn signal for at least the last 50 feet before you make your turn. make up your mind about your turn before you get to the turning point.

When you prepare for a right turn should you remain as close to the center of the lane as possible?


Term 1. A regulation sign is usually what shape? Definition White rectangles with black lettering or symbols.
Term 20. How far before a turn must you signal? Definition 100 feet.
Term 21. When preparing for a right turn, should you stay as close to the center of the lane as possible? Definition True

How many seconds away should you be from a car?

three seconds

How many feet do you stop before a stop sign?

150 feet

Is a rolling stop illegal?

Instead of doing it on a sign-by-sign basis, rolling stops become a matter of habit. That’s when the trouble starts. You might consider it a minor violation, but that’s not how law enforcement sees it.

How many feet should you drive behind a truck?

One good rule for how much space you should keep in front of you is at least 1 second for each 10 feet of vehicle length at speeds below 40 mph. At greater speeds, you must add 1 second for safety. For example, if you are driving a 40-foot vehicle, you should leave 4 seconds between you and the vehicle ahead.

At what time must you use your headlights?

Headlights are required to be on 1/2 hour after sunset to 1/2 hour before sunrise, when visibility is less than 500 feet, or any time the weather conditions require usage of the motor vehicle’s windshield wipers to operate the vehicle in a careful and prudent manner, including in fog.

Can I get pulled over for having my high beams on?

If your car has headlights, which they all do, they must be in working condition. He may or may not ticket you, but you can be pulled over for having a headlight out. No you will not get a ticket. If you had been pulled over, a “fix-it-ticket” would have been issued to the registered owner of the vehicle.

Is using high beams illegal?

High beams are to be used only in rural areas. High beams must be dimmed when approaching traffic is within 500 feet. High beams should not be used on lighted roads or when driving in fog, rain, snow, or smoke. High beams are not permitted when you cannot see at least 200 feet ahead of you.

Can I drive with my high beams on?

If you are driving with your high-beam lights on, you must dim them at least 500 ft from any oncoming vehicle, so you don’t blind the oncoming driver. You must use low-beam lights if you are within 200-300 ft of the vehicle you are following. Consult your state’s Drivers Handbook for details.

Will cops pull you over for a headlight out?

Getting pulled over for having one headlight out In most states, it is required by law that headlights must be used from sunset to sunrise. Therefore, if you have a headlight burned out, it is possible (and likely even probable) that you’ll get pulled over.

How much is a ticket for high beams?

California Vehicle Code (CVC) § 24409 A High Beam Headlight Violation ticket will cost you $238 and Up in fines plus $1,000+ in insurance hikes and penalties.

Why do my low beams not work but my high beams do?

2. Headlight Fuse or Relay is Bad. Like all electrical systems, the headlights in your vehicle have a fuse in the circuit to prevent too much electricity from reaching the bulb. However, if the relay goes bad, you won’t be able to switch between high and low beams.

How do you fix low beam headlights not working?

4 Steps to Fix a Low Beam Headlight Bulb

  1. Find the blown out bulb.
  2. Buy the replacement bulb.
  3. Get your tools ready.
  4. Disconnect the negative terminal on the battery.
  5. Remove the trim pieces.
  6. Find the headlight holder.
  7. Disconnect the cables from the headlight.
  8. Remove the headlight bulb from the bulb housing.

Do low beams stay on with high beams?

When you activate your high beams the low beam filament is turned off. If you have separate low beam and high beam bulbs like some older cars do, they work pretty much the same way except that the low beams stay on when the high beams turn on.