What is the Hebrew name for God of mercy?

What is the Hebrew name for God of mercy?

El Rachum (Compassionate/Merciful God)~~

What is the Hebrew word for mercies?

hhesed. This Hebrew word is usually translated as “mercy” or “kindness.” It is derived from the root חסד (Hh. S.D, Strong’s #2616), which is usually translated as “to be merciful” or “to be kind.” However, these abstract English terms do not convey the more concrete meaning of the original Hebrew.

What does the Hebrew word Rachem mean?

Mercy of God

What does racham mean in Hebrew?


What is Darash?

It’s this Hebrew word darash. It means “to search,” “to seek,” “to examine,” and “to investigate.” God says, in Jeremiah 29:13-14, “And you shall seek Me, and find Me, when you shall search for Me with all your heart.

What is Aramaic friend?

ARAMAIC WORD STUDY – FRIEND – RACHAM – רחס Jesus spoke Aramaic and the word used in the Aramaic Bible is racham.

What does friend mean in Hebrew?


Is compassion the same as mercy?

It’s the compassion or forgiveness shown to someone. But mercy is a noun in action. The meaning of compassion is to recognize the suffering of others and then take action to help. Compassion is more than feeling concerned about someone in distress or caring about a person’s misfortune.

What does the Hebrew word bimah mean?

Bimah, also spelled Bima, also called Almemar, orAlmemor, (from Arabic al-minbar, “platform”), in Jewish synagogues, a raised platform with a reading desk from which, in the Ashkenazi (German) ritual, the Torah and Hafṭarah (a reading from the prophets) are read on the Sabbath and festivals.

What is the meaning of beema?


What’s the meaning of insurance?


What is beam in simple words?

A beam is a structural element that primarily resists loads applied laterally to the beam’s axis. Its mode of deflection is primarily by bending. The loads applied to the beam result in reaction forces at the beam’s support points.

What does beam mean in the Bible?

The word translated as beam refers to a rafter or a log such as would hold up the roof of a house.

What does beam mean on a ship?

Beam: The width of the boat, measured at its widest point. Generally, the larger the beam, the more stable the boat. Bilge: A compartment at the lowest point of a boat’s hull. Draft:The distance between the waterline and the keel of a boat; the minimum depth of water in which a boat will float.

What is the longest ship in the world?

Mærsk McKinney Møller

What is the biggest ship in the world?

Seawise Giant

What is a freeboard?

Freeboard, distance from the waterline to the freeboard deck of a fully loaded ship; it is measured amidships at the side of the hull. The freeboard deck is the deck below which all bulkheads are made watertight; above it that precaution is not necessary.

What is the function of freeboard?

Freeboard is the distance measured from the waterline to the upper edge of the deck plating at side of the freeboard deck amidships. Ships must have a load line mark located amidships on both sides to indicate the maximum allowable draught under specified conditions (geographical and seasonal).

What is freeboard height?

Freeboard is elevating a building’s lowest floor above predicted flood elevations by a small additional height (generally 1-3 feet above National Flood Insurance Program [NFIP] minimum height requirements).

What is high freeboard?

In sailing and boating, a vessel’s freeboard is the distance from the waterline to the upper deck level, measured at the lowest point of sheer where water can enter the boat or ship. A higher freeboard will give more room in the cabin, but will increase weight and drag, compromising speed.

What is freeboard in a pond?

Freeboard is the distance between the normal maximum operating water surface of the pond and the top of the dike.

Who is the give way vessel?

Give-way vessel: The vessel that is required to take early and substantial action to keep out of the way of other vessels by stopping, slowing down, or changing course. Avoid crossing in front of other vessels. Any change of course and/or speed should be large enough to be readily apparent to another vessel.

What is the importance of freeboard in design?

Freeboard is necessary or the channel can overtop, with water spilling out and flood the surrounding lands. Without freeboard, channels that experience unanticipated surges in flow, wave action, or turbulence can overtop.

What is freeboard in drainage design?

Freeboard – Freeboard is the vertical distance between the design water surface and the top of embankment. The freeboard criteria is 1 foot minimum is required between the water quality design storm water elevation to the top of embankment.

What is a freeboard in engineering?

Freeboard is the elevation of a building’s lowest floor to a height above the minimum base flood elevation (BFE) during the initial construction process.

Why freeboard is provided in bridge?

Bridge freeboard is the clearance between the lower limit of the bridge superstructure or the bottom of the culvert top slab and the Freeboard High Water surface elevation. An appropriate amount of freeboard allows for the safe passage of ice and debris through the structure (not typically required for culverts).

What is afflux in bridge?

Afflux is defined as the increase in upstream water depth as a result of constriction of a flow channel. Prior to the. placement of a bridge across a watercourse, the water surface for a given flood discharge may be assumed a normal.

What is use of bearing in bridge?

A bridge bearing carries the loads or movement in both vertical and horizontal directions from the bridge superstructure and transfers those loads to the bridge piers and abutments. The loads can be live load and dead load in vertical directions, or wind load, earthquake load, etc., in horizontal directions.