What should you do to avoid colliding with another boat?

by ·

What should you do to avoid colliding with another boat?

To prevent a collision, pleasure craft operators should:

  1. Follow the rules of navigation.
  2. Pay attention to navigation aids.
  3. Keep a sharp watch and appoint one person to be the “lookout.”
  4. Maintain a safe speed, especially in congested traffic and at night.
  5. Look in all directions before making any turn.

What is the main reason for assuming the help position when you are stranded in the water quizlet?

What is the main reason for assuming the HELP position when you are stranded in the water? Your boat capsizes and floats away. What should you do? Securely fasten your life jacket, and wait for help.

What can a vessel operator use to make sure he or she has everything needed for a safe trip quizlet?

What kind of vessel operator use to make sure he or she has everything needed for a safe trip? While boating, you see a red flag with a white diagonal stripe.

What can a vessel operator use to make sure he or she has everything needed?

Pre-Departure Checklist

  • Check the hull for cracks or other damage.
  • Make sure the steering and throttle controls are operating properly.
  • Check the electrical system and that all lights are working properly.
  • Check for any fuel leaks from the tank, fuel lines, and carburetor.
  • Check the propulsion and cooling systems.

What can a vessel operator use to make sure?

Another way you can assure a good time while operating your vessel is to perform a pre-departure check. Check the weather forecast for the area and timeframe during which you will be boating. Make sure the steering and throttle controls are operating properly. Check that all lights are working properly.

What every boater needs?

Here are the things you should always bring on a boat:

  • 1) A Handheld Horn (For Backup)
  • 2) Extra Life Vests.
  • 3) First Aid and Safety Kit.
  • 4) Fire Extinguisher.
  • 5) Paddle.
  • 6) Jump Starter / Battery Bank.
  • 7) Solar Panel (For Backup Power)
  • 8) Dock Lines.

Why should a boat’s gas tank never be completely filled?

It’s important to never fill the tank of your boat beyond 90% full. This leaves room for gas to expand and avoids the potential for overflow. After you’re done fueling, tightly replace the gas cap. This will prevent the escape of fuel vapors.

How do you know when you are operating your vessel at a safe speed?

In establishing a safe operating speed, the operator must take into account visibility; traffic density; ability to maneuver the vessel (stopping distance and turning ability); background light at night; proximity of navigational hazards; draft of the vessel; limitations of radar equipment; and the state of wind, sea.

Which is the most important factor in determining a safe vessel speed?

Traffic density

Which of these anchors is a good choice?

Choose an anchor that fits your boat and the boating conditions. Plow-Style Anchor: This anchor is good for most boats and gets its holding power by plowing into bottom sediment. Fluke-Style Anchor: This anchor (commonly referred to as Danforth) is similar to the plow style but is more lightweight.

What will happen if you shut off the engine of a PWC?

You are operating a PWC. What will happen if you shut off the engine? The PWC will not stop until it runs out of gas. The PWC will lose all buoyancy and turn over.

What happens when you put the throttle to idle or shut off the engine on a Ford moving PWC?

If you release the throttle to idle or if the engine shuts off during operation you will lose all steering control. In either situation, the PWC will continue in the direction it was headed before the throttle was released or the engine was shut-off.

What happens when a PWC steering is turned to the right?

For example, if the steering control is turned right, the nozzle turns right and the jet of water pushes the back of the vessel to the left, which causes the PWC to turn right.

What part of a PWC is dangerous to your hands feet and hair?

Keep hands, feet, loose clothing, and hair away from the pump intake area. Before cleaning debris from the pump intake, be sure to shut off the engine. The jet of water exiting the steering nozzle at the rear of the PWC can cause severe internal injuries.

What should you consider when operating your boat or PWC at high speed?

Avoid high speeds when operating near shore. Keep hands, feet, loose clothing, and hair away from the pump intake area. Keep everyone clear of the steering nozzle at the rear of the PWC unless the PWC is shut off. The jet of water exiting the steering nozzle can cause severe internal injuries.

Who must wear a lifejacket while on a PWC?

Any person operating or manipulating, or who is a passenger on a PWC, water skis, sailboard, parasail or similar devices shall wear a proper PFD. Children 12 years and younger are required to wear a USCG approved PFD while on an open deck or cockpit of a vessel that is underway or when the child is being towed.

What must be on board and available for inspection by enforcement officers whenever a registered vessel is operated?

Te boat or vessel should always have a CERTIFICATE OF REGISTRATION on board and available for inspection by enforcement officers whenever a vessel is operated. This certificate must be obtained by registering and numbering after 30 days of the purchase of the vessel.

Is a flare gun required on a boat?

Boats over 16 feet must carry visual signals for both day and night use. Examples of pyrotechnic devices or flares that would qualify are orange or white smoke and aerial light flares. Some flares are self-launching while others require a flare gun to send them into the sky.

What is the problem with using your boat’s engine to drive it onto a trailer?

NOTE – While many people drive the boat onto the trailer, it isn’t advised. Using the engine to assist trailering erodes the ramp bed, can lead to debris being sucked into the engine, and can cause an accident! Make sure you drain all water from the boat – the bilge, the live well, the trailer lights, etc.

What is good for cleaning your vessel?

When dealing with plastic and glass in and around the boat console area, an all-purpose spray cleaner, or “Windex” will do the trick. I like to use a partially wet, soft sponge for the initial rub down, and then finish the job with a dry cloth.

What is good for cleaning your vessel and does not harm lakes?

Wash your boat frequently with a sponge and plain water to avoid the buildup that calls for harsh cleaners. Use phosphate-free, biodegradable and non-toxic cleaners. Though much less harmful, these cleaners can still cause damage to local aquatic life and should be used only on land when possible.

How often should I clean my boat?

To optimize boat performance, hull cleaning is desirable as soon as fouling accrues. This normally happens every 4-12 weeks. There are a few factors that will have an impact on cleaning frequency, such as geographical location, water temperature and salinity but also usage patterns.

Can I use vinegar to clean my boat?

Mix one cup white vinegar in two gallons water. Pour one cup white vinegar in one quart warm water; rinse and squeegee. Wipe with ½ cup vinegar and ½ cup water solution. Pour in baking soda and scrub with a brush.

Can you use Dawn to wash a boat?

Yes – when washing the boat, use a mild detergent, such as Dawn or Ivory dish soap, or similar commercially-produced detergent, and warm water solution. DO NOT use abrasive cleaners, solvents, ammonia or chlorine, as these will damage the gel coat surface.

How do I get brown stains off the bottom of my boat?

Also known as “Slimey Grimey”. You can also get oxalic acid at the marine supply stores. You’ll just spray it on and wait an hour or less. The brown algae will be gone.

What is the best product to clean a boat?

9 Non-Negotiable Boat Cleaning Supplies For a Spotless Vessel

  1. Better Boat Stain Mildew Remover.
  2. Bilge Cleaner Concentrate.
  3. Boat Cleaner Wipes with UV.
  4. Boat Enzymatic Toilet Tank Digest.
  5. Boat Marine Polish with Carnauba Wax.
  6. Boat Wax Sealant Hybrid Ceramic Spray.
  7. Instant Boat Hull Cleaner.
  8. Marine Degreaser Black Streak Remover.

Can I pressure wash my boat?

Pressure cleaning is a great way to get rid of salt on the surface of your boat. A lot of pressure washing machines also have a rotating scrub brush, which is perfect for cleaning the boat with soap. If you don’t pressure clean your boat, you’ll need to do all the scrubbing and washing by hand with a sponge.

How long does wax last on a boat?

3-4 months

Can I use car wash soap on my boat?

Yes, any standard car wash solution can be used on a boat. The types of dirt you’re looking to remove on a boat vs. a car may be a lot more stubborn and require more elbow grease.

Can I use car polish on my boat?

Your boat does need to be protected. Any car wax product as a rule can be used on your boat so long as there is no degree of oxidation. Wax products are made using natural wax ingredients like carnauba. As a rule, if your boat is stored outside it will need either a cleaner wax or a dedicated polish first.