Why does my washer say F 02?
Why does my washer say F 02?
The F02 error code on a Whirlpool washer indicates that the control detects a long drain time. This can be caused by excessive suds in the tub, a restriction or clog in the drain system, or by a number of other component failures.
What does the code F 02 mean on a Kenmore washer?
The F2 fault code indicates a problem with the washer’s drain system, and you must troubleshoot the problem to determine how to fix the washer and clear the code.
What does F02 mean on a Whirlpool dryer?
The F02 error means the dryer user interface keypad has a stuck key or the user interface board has failed. You can try to reset the user interface board by unplugging the dryer or turning off the breaker supplying voltage to the dryer at the breaker panel in your home.
What does F02 mean?
long drain time
The F02 error code on a Whirlpool washer indicates that the control detects a long drain time. This can be caused by excessive suds in the tub, a restriction or clog in the drain system or by a number of other component failures.
What does f2e2 mean on Maytag washer?
There may be a problem with the User Interface or Keypad, the Control, or the associated wiring.
What does F2 error mean?
The “F2” fault code indicates the oven got too hot. Let the oven cool down before reconnecting the power cord. If “F2” displays when cold, this could indicate a faulty electronic oven control board or a faulty oven temperature sensor probe.
What does F2 mean on a dryer?
F2 flashes when there is a stuck button or user interface mismatch. You can try performing a hard reset to fix the problem. Unplug or turn the circuit breaker off for 30 seconds. Plug the power cord into the wall outlet or turn the breaker back on and wait 30 seconds.
What does F2 mean on dryer?
What is a F21 error on Whirlpool washer?
If your Whirlpool washer is showing an F21 error code, this means that your washer is unable to drain properly. This can be caused by a clogged pipe, a faulty drain pump, or something simpler.
What was the F02 code on my Kenmore Elite washer?
The F02 code was for filter in the pump just open the pump by turning the knob and watch out, if you have water in your washer it will drain out. the filter/pump assembly was full of soap scum and lint all mixed up. Once I clean out, all is good. Sears wanted to charge me $100 to come out and try to sell me a new pump.
What does the Whirlpool duet F02 error code mean?
Troubleshooting and Repair – F02 Error Code – GHW9150PW0 The Whirlpool Duet Washer F02 Error is a long drain error. It means the drain time has exceeded eight minutes so the control shuts down the cycle and reports this error.
What causes F02 error code He3 elite washer?
SOLVED: F02 Error Code HE3 Elite Washer – Kenmore Elite HE3 Washing Machine – iFixit F/02 error code potential causes Check the drain hose and make sure it is not plugged or kinked Check the electrical connections at the pump and make sure the pump is running.
What to do if your KitchenAid appliance has an F2 code?
If connections are not damaged, measure door switch (door open = latch open) and latch switch (unlatch = switch open) and replace either if defective. If corrections are made during any step, power should be reconnected and the unit should be tested. Press and hold any key to clear the error code and F2 code should appear.